How to use AirDrop, and what to do when it fails
Key takeaways
- Turn on Wi-Fi and Bluetooth on both devices, stay within about 30 feet, disconnect Personal Hotspot, and set the receiver to Contacts Only or Everyone.
- On software version 26.2 or later, sharing with non-contacts can require an AirDrop code, then 30 days of sharing without another code.
- If the sender reports success, check Photos, Files, or Downloads before resending, since received items do not all land in one folder.
- On a Mac, test with the Finder AirDrop window open, then review VPN settings, firewall options such as Block all incoming connections, and software updates.
AirDrop is Apple’s built-in way to send photos, videos, documents, and other items wirelessly between nearby iPhones, iPads, and Macs. To use it, enable Wi-Fi and Bluetooth, make the receiving device discoverable, then choose AirDrop from the Share menu. This AirDrop guide covers sending, receiving, and troubleshooting without jumping straight to disruptive resets. (support.apple.com)
How do you use AirDrop between iPhone, iPad, and Mac?
Open the item you want to share, select Share > AirDrop, and choose the recipient. The receiving person accepts the transfer or follows any code prompt; transfers between your own devices signed in to the same Apple Account are accepted automatically. Both devices need Wi-Fi and Bluetooth enabled and must initially be nearby. (support.apple.com)
Prepare the receiving device
Before selecting files, check these essentials on both devices:
- Enable Wi-Fi and Bluetooth. AirDrop needs both, even if you normally use Ethernet on your Mac.
- Stay close. Apple specifies a distance within approximately 30 feet, or 10 meters; sitting beside the receiving device makes testing straightforward.
- Disconnect Personal Hotspot. Apple recommends disconnecting it on either device before sharing.
- Allow the sender to find you. Choose Contacts Only or temporarily enable receiving from everyone nearby. (support.apple.com)
On iPhone or iPad, open Control Center, touch and hold the connectivity controls, tap AirDrop, then choose Contacts Only or Everyone for 10 Minutes. On Mac, open Control Center > AirDrop, turn it on, and use its options to select Contacts Only or Everyone. (support.apple.com)
Contacts Only requires the recipient’s contact card for the sender to contain the sender’s Apple Account email address or phone number. Saving someone’s name alone is not enough. If you are exchanging a file with someone new, temporarily allowing everyone avoids that contact-matching requirement. (support.apple.com)
Send from iPhone or iPad
- Open the source app, such as Photos or Files.
- Select the photo, document, or group of items you want to send.
- Tap the Share button, then AirDrop.
- Tap the intended recipient under People.
- Ask them to accept or complete the displayed verification steps. (support.apple.com)
For your first transfer, try one ordinary photo rather than an entire album. That gives you a simple way to confirm the connection before committing to a larger selection. Check the recipient’s name carefully, especially when several nearby devices appear.
Send from Mac
Select a file in Finder, click the Share button, and choose AirDrop. Select the recipient and wait for them to accept. Alternatively, open Finder > AirDrop and drag a file onto the recipient shown in the window. (support.apple.com)
For example, you could send a PDF from your Mac to your iPad before reviewing it elsewhere. Keep the original until you have confirmed that the received copy opens correctly. Treat successful receipt—not merely selecting the recipient—as the end of the task.
Receiving files and handling AirDrop codes
On supported devices running iOS 26.2, iPadOS 26.2, macOS 26.2, or later, sharing with someone outside your contacts can require an AirDrop code. The recipient selects the option to get a code and shares it with the sender, who enters it on their device. Follow the on-screen instructions rather than treating the extra prompt as a failure. (support.apple.com)
After code verification, Apple allows further AirDrop sharing with that person for 30 days without another code. You can end that connection sooner through the Contacts app’s Other Known list by selecting Forget This Person. Only exchange a code with the person you actually intend to share with. (support.apple.com)
Received items do not all land in one universal AirDrop folder:
- iPhone and iPad: Photos generally appear in Photos; some documents are saved in Files or handled by an appropriate app.
- Mac: Check Downloads first. Some transfers offer a choice, such as saving a picture to Downloads or opening it in Photos.
- Your own devices: Automatic acceptance means you may not see an approval request. (support.apple.com)
If the sender reports success, check those destinations before resending. Otherwise, you may create duplicate copies while troubleshooting a transfer that already finished.
Why is AirDrop not working?
When AirDrop is not working, start by checking wireless settings, distance, and the recipient’s receiving permissions. Apple specifically recommends confirming Wi-Fi and Bluetooth on both devices, checking discoverability, keeping devices close, and restarting if necessary. Work through these checks on both ends rather than assuming the sender is responsible. (support.apple.com)
Use the visible symptom to choose your next test:
| Symptom | First useful check |
|---|---|
| Recipient never appears | Check receiving permissions, Wi-Fi, Bluetooth, and proximity. |
| Transfer stays on Waiting | Ask the recipient to look for an acceptance request or code prompt. |
| Transfer fails after starting | Retry with one small file, then restart both devices. |
| Transfer completes but the file seems missing | Check Photos, Files, or Downloads before sending again. |
These checks follow Apple’s setup, receiving, and restart guidance; the small-file retry is a practical diagnostic test rather than a guaranteed fix. Change one thing at a time so you can tell which action helped. (support.apple.com)
AirDrop troubleshooting on iPhone and iPad
Start by reopening the receiving options and selecting Everyone for 10 Minutes for a controlled test. That setting expires: on iOS 16.2 and later, it returns to Contacts Only when signed in to an Apple Account, or Receiving Off when signed out. A device that was discoverable earlier may therefore no longer appear. (support.apple.com)
Next, confirm that Personal Hotspot is disconnected. Try sending one photo while both people watch their devices for prompts. If the attempt still fails, restart both devices and repeat that same test rather than changing several settings simultaneously. (support.apple.com)
For a school or work device, ask the administrator whether AirDrop is permitted. Device-management restrictions can disable it, so a missing or unavailable feature may reflect policy rather than a broken wireless connection. Do not remove management profiles to bypass an organization’s restrictions. (support.apple.com)
Troubleshooting AirDrop on Mac
Begin Mac AirDrop troubleshooting in Finder > AirDrop. Confirm the receiving setting and leave the window open during your test. If Finder’s AirDrop window is open, Apple says the acceptance prompt appears there rather than in Notification Center, making that window worth checking when a transfer seems stuck. (support.apple.com)
Next, review VPN or security software. Apple warns that a VPN configuration preventing local networking may interfere with Continuity features, including AirDrop. On a personally managed device, check the software’s local-network options or follow its developer’s troubleshooting instructions; on a managed Mac, involve IT instead. (support.apple.com)
You can also inspect System Settings > Network > Firewall > Options. Apple’s firewall includes a Block all incoming connections setting and controls for allowing built-in software. Review restrictive settings with the administrator or software provider rather than switching off all protection indefinitely. (support.apple.com)
Finally, restart the Mac and check for compatible updates under System Settings > General > Software Update. Back up before installing updates. Apple recommends current compatible macOS software for security, stability, and compatibility, though an update is not a guaranteed AirDrop fix. (support.apple.com)
A sensible stopping point
If troubleshooting AirDrop has become a loop, record the symptom, device models, software versions, and whether sending fails in one direction or both. If possible, test with another device to narrow your support request. Avoid factory resets or account sign-outs as casual next steps.
For a large collection, consider syncing or cloud-based sharing instead; Apple describes AirDrop as best suited to a small selection of files. Once sharing is finished, return receiving permissions to your preferred restrictive setting. The useful takeaway is simple: verify discovery, watch for acceptance or code prompts, and confirm where the file arrived before trying more invasive fixes. (support.apple.com)
Related guides
Sources
- Use AirDrop to send items to nearby Apple devices - Apple Support (BY)
- Use AirDrop to send items to nearby Apple devices - Apple Support (BY)
- Use AirDrop to send items to nearby Apple devices - Apple Support
- How to use AirDrop on your iPhone or iPad - Apple Support
- Welcome to Mac mini Getting Started Guide – Apple Support (AU)
- Use AirDrop to send items to nearby Apple devices - Apple Support (IE)
- Review device management restrictions for Apple devices - Apple Support (CA)
- Change Firewall settings on Mac - Apple Support (MO)
- Update macOS on Mac - Apple Support