How to take photos with GPS location on your phone

Key takeaways

  • On iPhone, set Camera location access to While Using the App with Precise Location on, then take a test photo and check it in Photos.
  • Android tagging usually needs both camera location permission and the camera's own setting, labelled Save location, Location tags, or Store location data by manufacturer.
  • Google Photos can show estimated or manually added places, and it does not allow removing camera-provided locations from existing photos.
  • To stop future tagging on iPhone, set Camera to Never in Location Services, or turn off Location under Share Options for a single share.

To take photos with GPS location on your phone, enable location services, give your camera location permission, and turn on its location-saving option where available. This lets supported camera apps record where each photo was taken. Below, you’ll learn how to set up iPhone and Android photo tagging, check the results, and control what location information you share. (support.google.com)

How do photos save GPS location?

Geotagging images means attaching geographic information to a photo. When your camera has permission, it can save location coordinates alongside the picture as metadata. On iPhone, location services can use GPS, Wi-Fi, cellular networks, and Bluetooth, so “GPS tagging” does not necessarily mean the location came from satellites alone. (support.apple.com)

Location tagging photos helps you organize pictures by place and find images from a particular trip or site. However, a location shown in your photo library is not always a camera-recorded geotag: Google Photos can also estimate places from landmarks or let you add them manually. That distinction matters when you need a location captured at the time of photography rather than a label added later. (support.google.com)

Set up GPS photo tagging on iPhone

Start with the Camera app’s location permission, not just the phone’s main location switch. Apple lets you control location access separately for each app and choose whether an app receives precise or approximate location. For more specific photo locations, enable Precise Location for Camera if that option appears. (support.apple.com)

  1. Open Settings and select Privacy & Security.
  2. Tap Location Services and make sure it is on.
  3. Scroll down and select Camera.
  4. Choose While Using the App.
  5. Turn on Precise Location, if available.
  6. Open Camera and take a new test photo. These permissions allow Camera to use location while you are taking pictures. (support.apple.com)

Next, open the test image in Photos. Swipe up or tap the Info button to see its details, including a location map when location information is available. Check that the place shown matches where you took the picture before relying on the setup for an entire outing. (support.apple.com)

Enable Android photo GPS tagging

Android photo GPS tagging generally requires both camera location permission and the camera’s own location-saving setting. Menu names vary between manufacturers, so look for wording such as Save location, Location tags, or Store location data rather than expecting one universal switch. Google documents different labels for Pixel, Samsung, Motorola, OnePlus, and other devices. (support.google.com)

Use this setup sequence:

  1. Enable your phone’s location setting. Confirm location access is available before testing the camera.
  2. Check camera permissions. Open the camera’s app information, select Permissions, and review Location. Allow access while using the app where offered, and enable precise location if you want a more specific position.
  3. Open Camera settings. Find and enable its location-saving option.
  4. Take a new picture. Use a fresh image to check the setup rather than assuming an older photo will change. (support.google.com)

Common camera setting labels include:

Phone manufacturer Location option to look for
Google Pixel Save location
Samsung Location tags
Motorola Save location
OnePlus Store location data

These are starting points; follow the available wording on your device. Android GPS photo tagging is enabled through the camera you actually use, so check a third-party camera separately instead of assuming it follows the stock camera’s settings. (support.google.com)

How can you check that a photo has the right location?

Open the photo’s information or details panel and inspect the location attached to it. On iPhone, Photos displays available location information after you swipe up or tap Info. In Google Photos, review the image’s location details, remembering that a displayed place may be camera-provided, manually added, or estimated. (support.apple.com)

For important pictures, make verification part of your workflow:

  • Check a test photo before starting. Confirm that location appears and points to the expected place.
  • Check the copy you deliver. Send one sample through your intended sharing method, then inspect the received file rather than checking only your library.
  • Separate capture from correction. If you add a missing location afterward, treat it as a manual annotation, not an automatically captured position.

This distinction is especially useful with Google Photos: location edits and sharing controls there do not necessarily change the original camera location included when you download and email a photo. Test the delivery route you plan to use. (support.google.com)

Improve accuracy and troubleshoot missing tags

An enabled setting does not guarantee an accurate position. Buildings, bridges, trees, indoor spaces, and reflected satellite signals can weaken GPS positioning or move the apparent location. A map pin should therefore be treated as location context, not an unquestionable measurement. (gps.gov)

If a new photo has no location, recheck the phone’s location setting, the camera permission, and—on Android—the camera’s location-saving switch. If the location is wrong, try another test outdoors with a clearer view of the sky. This helps distinguish a permissions problem from poor reception. (support.apple.com)

For site documentation, add a caption identifying the building, room, asset, or viewpoint. For example, “north stairwell, second-floor landing” gives a reviewer context that a site-level map pin cannot provide. Keep any manually added description distinct from the automatically recorded location.

Use geotagged photos for offline construction inspections

GPS positioning itself can work without an internet connection, but your inspection app’s offline behavior is a separate consideration. Maps, uploads, templates, and synchronization may need preparation or connectivity. For example, SafetyCulture’s offline guidance recommends downloading templates and inspections before starting, saving progress during the inspection, and syncing afterward. (septentrio.com)

When evaluating platforms for offline inspections with construction photo GPS tagging, test the complete workflow rather than relying only on an “offline” feature description. Use a realistic trial:

  • Prepare online: Download the required forms and open the inspection you intend to use.
  • Capture offline: Disable connectivity while leaving location services enabled, then take sample photos inside the inspection workflow.
  • Review records: Check whether each image has its own location or only the inspection has a site location.
  • Reconnect and export: Confirm that photos, notes, and location information survive synchronization and appear in the delivered report.

Treat these as acceptance checks, not assumed platform capabilities. Include both an outdoor location and an indoor area in the trial, since GPS reception can deteriorate inside buildings. Keep room numbers and asset identifiers in your notes so reviewers can still understand the record when positioning is weak. (gps.gov)

Turn off GPS photo tagging on iPhone and protect shared images

To turn off GPS photo tagging on iPhone, go to Settings > Privacy & Security > Location Services > Camera > Never. This stops Camera from collecting location for future photos; existing images require separate attention. To remove a saved photo’s location in Photos, open it, tap More, and choose Adjust Location > No Location. (support.apple.com)

You can also keep locations for personal organization without including them in a particular share. In Photos, select the images, tap Share > Options, and turn off Location before sharing. This is different from disabling Camera’s permission: one controls a sharing action, while the other controls future collection. (apple.com)

On Android, turn off the camera’s location-saving option to stop future tagging. Be careful when managing existing photos through Google Photos: it allows changes to estimated and manually added locations, but not removal of camera-provided locations. Also remember that landmarks and visible signs can reveal a place even when location metadata is not shared. (support.google.com)

Make one test photo your starting point

Before a trip, inspection, or documentation task, take one sample and check its location details. If you need to deliver location information, test the shared copy too; sharing behavior can differ from what your library displays. That small check helps you catch missing tags early and decide what information should stay private. (support.apple.com)

Sources

  1. Change your camera location settings - Google Photos Help
  2. Manage location metadata in Photos - Apple Support
  3. Understand, find & edit your photos' locations - Computer - Google Photos Help
  4. Turn Location Services and GPS on or off on your iPhone, iPad or iPod touch - Apple Support (IE)
  5. See photo and video information on iPhone – Apple Support (UK)
  6. Choose which apps use your Pixel phone’s location - Pixel Phone Help
  7. gps.gov: Gps accuracy 0
  8. septentrio.com: About gnss
  9. Legal - Camera and ARKit & Privacy- Apple